Approved AFIT Cut-Off Marks for 2026/2027 is Out

Air Force Institute of Technology (AFIT) Kaduna Cut-Off Mark for All Courses 2026/2027:- If you are searching for the Air Force Institute of Technology (AFIT), Kaduna Cut-Off Mark for All Courses 2026/2027, this article provides the latest information on AFIT’s admission requirements, JAMB cut-off marks, available degree and National Diploma (ND) programmes, and what candidates need to know before applying.

The Air Force Institute of Technology, Kaduna (AFIT) has officially released its admission information for the 2026/2027 academic session. According to AFIT’s official admission notice, candidates seeking admission into its degree programmes must score at least 200 in the 2026 UTME, while candidates applying for National Diploma (ND) programmes must score at least 160.

This means that there is not one single AFIT cut-off mark for every programme. The applicable minimum depends primarily on whether you are applying for a degree or ND programme.

Table of Contents

AFIT Cut-Off Mark for 2026/2027

The official AFIT admission notice gives the following minimum UTME scores:

Programme Type Minimum JAMB Score
Degree (B.Sc./B.Eng.) 200
National Diploma (ND) 160

Candidates who scored 200 and above in the 2026 UTME are eligible to apply for AFIT degree programmes, while candidates with 160 and above can apply for the listed ND programmes, provided they meet the other admission requirements.

Therefore, if you are specifically searching for the AFIT Kaduna cut-off mark for all courses 2026/2027, the most important figures to remember are 200 for degree programmes and 160 for ND programmes.

Is AFIT Cut-Off Mark for 2026/2027 Out?

Yes. AFIT has published its official 2026/2027 Post-UTME and Direct Entry admission notice.

The notice states that applications for degree and ND programmes were opened for qualified candidates, with degree applicants required to have a minimum UTME score of 200 and ND applicants a minimum score of 160.

The university also subsequently announced an extension of its Post-UTME registration deadline to 23 August 2026. Candidates should check the latest official admission information for any further announcements because deadlines can change.

AFIT Cut-Off Mark for Degree Courses 2026/2027

For candidates applying for AFIT’s undergraduate B.Sc. and B.Eng. programmes, the official minimum UTME score is:

200

This applies to candidates seeking admission into the degree programmes listed for the 2026/2027 academic session.

The degree programmes listed by AFIT include:

  1. B.Eng Aerospace Engineering
  2. B.Eng Automotive Engineering
  3. B.Eng Mechanical Engineering
  4. B.Eng Mechatronics Engineering
  5. B.Eng Metallurgical and Materials Engineering
  6. B.Eng Civil Engineering
  7. B.Eng Electrical/Electronics Engineering
  8. B.Eng Information and Communication Technology
  9. B.Eng Telecommunication Engineering
  10. B.Sc Chemistry
  11. B.Sc Mathematics
  12. B.Sc Statistics
  13. B.Sc Physics
  14. B.Sc Physics with Electronics
  15. B.Sc Computer Science
  16. B.Sc Cyber Security
  17. B.Sc Accounting
  18. B.Sc Business Administration
  19. B.Sc Economics
  20. B.Sc International Relations

These programmes are listed in AFIT’s official 2026/2027 admission announcement.

AFIT Cut-Off Mark for ND Courses 2026/2027

For candidates applying for the National Diploma (ND) programmes, the official minimum UTME score is:

160

The ND programmes listed for 2026/2027 are:

S/N ND Programme
1 ND Aircraft Engineering Technology
2 ND Civil Engineering Technology
3 ND Electrical/Electronics Engineering Technology
4 ND Mechanical Engineering Technology
5 ND Business Administration and Management

AFIT’s official admission notice confirms these programmes and the 160 UTME eligibility threshold for ND applicants.

AFIT Cut-Off Mark for Aerospace Engineering 2026/2027

The AFIT B.Eng Aerospace Engineering programme is a degree programme.

Therefore, candidates applying through UTME for the 2026/2027 admission exercise must have a minimum JAMB score of:

200

A score of 200 makes a candidate eligible to apply, subject to the other admission requirements. It does not, by itself, guarantee admission.

AFIT’s official programme information confirms Aerospace Engineering as one of its undergraduate degree programmes.

AFIT Cut-Off Mark for Mechanical Engineering 2026/2027

The minimum UTME score for candidates applying for the B.Eng Mechanical Engineering degree programme is:

200

Mechanical Engineering is one of the engineering programmes listed in AFIT’s 2026/2027 admission notice.

AFIT Cut-Off Mark for Mechatronics Engineering 2026/2027

For B.Eng Mechatronics Engineering, candidates applying through UTME must meet the degree-programme threshold of:

200

AFIT officially lists Mechatronics Engineering among its degree programmes for the 2026/2027 academic session.

AFIT Cut-Off Mark for Computer Science 2026/2027

The minimum UTME score for the B.Sc Computer Science degree programme is:

200

Computer Science is included among AFIT’s 2026/2027 undergraduate degree programmes.

Candidates should also ensure that they have the required O’Level subjects and the appropriate UTME subject combination.

AFIT Cut-Off Mark for Cyber Security 2026/2027

The minimum UTME score for the B.Sc Cyber Security degree programme is:

200

AFIT lists Cyber Security among its degree programmes for the 2026/2027 academic session.

It is worth noting that AFIT has identified Cyber Security as one of its highly sought-after programmes in its 2026/2027 internal transfer information, showing that the programme is competitive within the institution.

AFIT Cut-Off Mark for Electrical/Electronics Engineering

For B.Eng Electrical/Electronics Engineering, the minimum UTME score for the 2026/2027 degree admission exercise is:

200

The programme is officially listed among AFIT’s available degree courses.

AFIT Cut-Off Mark for Civil Engineering

The B.Eng Civil Engineering programme also falls under AFIT’s degree category.

Therefore, candidates seeking admission through UTME need a minimum score of:

200

Candidates must also satisfy the relevant O’Level and UTME subject requirements.

AFIT Cut-Off Mark for Automotive Engineering

The official 2026/2027 admission list includes B.Eng Automotive Engineering.

The applicable minimum UTME score is:

200

This is because the programme is offered as a degree programme.

AFIT Cut-Off Mark for Metallurgical and Materials Engineering

Candidates interested in B.Eng Metallurgical and Materials Engineering need to meet the degree-programme UTME threshold of:

200

The programme is listed by AFIT among its 2026/2027 degree programmes.

AFIT Cut-Off Mark for Physics

The minimum UTME score for B.Sc Physics is:

200

Physics is included in AFIT’s undergraduate degree programme list for the 2026/2027 academic session.

AFIT Cut-Off Mark for Physics with Electronics

For B.Sc Physics with Electronics, the applicable degree-programme UTME threshold is:

200

Candidates should check the specific O’Level and UTME subject requirements before applying.

AFIT Cut-Off Mark for Mathematics

For B.Sc Mathematics, candidates seeking admission through UTME must have:

200 or above

Mathematics is one of the programmes officially listed by AFIT for 2026/2027.

AFIT Cut-Off Mark for Statistics

The minimum UTME score for B.Sc Statistics is:

200

Statistics is included among AFIT’s degree programmes for the 2026/2027 session.

AFIT Cut-Off Mark for Chemistry

Candidates interested in B.Sc Chemistry need to meet the minimum degree-programme UTME score of:

200

Chemistry is listed among AFIT’s 2026/2027 undergraduate degree programmes.

AFIT Cut-Off Mark for Accounting

For B.Sc Accounting, the minimum UTME score is:

200

Accounting is included in AFIT’s official 2026/2027 degree programme list.

AFIT Cut-Off Mark for Business Administration

Candidates seeking admission into B.Sc Business Administration need a minimum UTME score of:

200

The programme is among the degree courses available for the 2026/2027 academic session.

AFIT Cut-Off Mark for Economics

The minimum JAMB score for B.Sc Economics is:

200

Economics is included in AFIT’s 2026/2027 degree programme list.

AFIT Cut-Off Mark for International Relations

Candidates interested in B.Sc International Relations must meet the degree-programme minimum of:

200

International Relations is one of the programmes listed by AFIT for the 2026/2027 academic session.

AFIT Cut-Off Mark for ND Aircraft Engineering Technology

Candidates applying for ND Aircraft Engineering Technology fall under AFIT’s National Diploma admission category.

The minimum UTME score is:

160

The programme is officially listed among AFIT’s 2026/2027 ND programmes.

AFIT Cut-Off Mark for ND Civil Engineering Technology

The minimum UTME score for ND Civil Engineering Technology is:

160

This programme is included in AFIT’s 2026/2027 ND admission list.

AFIT Cut-Off Mark for ND Electrical/Electronics Engineering Technology

The minimum JAMB score for ND Electrical/Electronics Engineering Technology is:

160

Candidates must also meet the other admission requirements for the programme.

AFIT Cut-Off Mark for ND Mechanical Engineering Technology

For ND Mechanical Engineering Technology, the minimum UTME score is:

160

The programme is listed among AFIT’s National Diploma programmes for 2026/2027.

AFIT Cut-Off Mark for ND Business Administration and Management

The minimum UTME score for ND Business Administration and Management is:

160

Candidates should also meet the relevant O’Level requirements before applying.

AFIT Cut-Off Mark 2026/2027 Table

For easy reference, here is the complete list of the programmes announced for the 2026/2027 admission exercise:

Programme Level Minimum UTME Score
Aerospace Engineering B.Eng 200
Automotive Engineering B.Eng 200
Mechanical Engineering B.Eng 200
Mechatronics Engineering B.Eng 200
Metallurgical & Materials Engineering B.Eng 200
Civil Engineering B.Eng 200
Electrical/Electronics Engineering B.Eng 200
Information & Communication Technology B.Eng 200
Telecommunication Engineering B.Eng 200
Chemistry B.Sc 200
Mathematics B.Sc 200
Statistics B.Sc 200
Physics B.Sc 200
Physics with Electronics B.Sc 200
Computer Science B.Sc 200
Cyber Security B.Sc 200
Accounting B.Sc 200
Business Administration B.Sc 200
Economics B.Sc 200
International Relations B.Sc 200
Aircraft Engineering Technology ND 160
Civil Engineering Technology ND 160
Electrical/Electronics Engineering Technology ND 160
Mechanical Engineering Technology ND 160
Business Administration and Management ND 160

All of the programmes and the relevant degree/ND categories are contained in AFIT’s official 2026/2027 admission announcement.

Does AFIT Accept 160 JAMB Score?

Yes, but only for the relevant ND programmes under the 2026/2027 admission notice.

AFIT states that candidates with 160 and above in the 2026 UTME are eligible to apply for its National Diploma programmes.

However, a candidate with 160 should not assume that they are eligible for AFIT’s degree programmes because the degree threshold is 200.

Does AFIT Accept 180 JAMB Score?

For the 2026/2027 admission exercise:

  • 180 can meet the ND threshold of 160.
  • 180 does not meet the degree threshold of 200.

Therefore, a candidate with 180 should not apply for an AFIT degree programme on the assumption that the general university cut-off is enough.

Does AFIT Accept 200 JAMB Score?

Yes.

A score of 200 or above meets AFIT’s stated minimum UTME requirement for its 2026/2027 degree programmes.

However, meeting the minimum score does not guarantee admission.

Does Scoring 200 Guarantee Admission into AFIT?

No.

A JAMB score of 200 only satisfies the stated minimum UTME threshold for AFIT’s degree programmes.

Candidates must also meet other requirements, including the relevant O’Level requirements, UTME subject combination and screening conditions.

Admission can also depend on the number of available spaces and the overall selection process.

AFIT Post-UTME 2026/2027 Requirements

AFIT’s official 2026/2027 admission notice indicates that candidates applying for degree programmes must have scored at least 200 in the 2026 UTME, while ND candidates need at least 160.

Candidates seeking admission should also ensure that:

  • Their UTME result is valid for the 2026 admission exercise.
  • Their selected course is available.
  • Their O’Level results meet the requirements.
  • Their UTME subject combination is appropriate.
  • They complete the screening application correctly.
  • Their admission details are accurate.

Candidates who initially selected another institution and wanted to change to AFIT were advised to effect the change through JAMB before the deadline stated by the institute.

AFIT Direct Entry Admission

AFIT also accepts applications through Direct Entry (DE) for eligible degree candidates.

The official 2026/2027 notice directs Direct Entry candidates to the AFIT admission portal for the specific requirements and application procedure.

AFIT’s academic information also indicates that relevant qualifications such as A-Level, HND, NCE and OND can be considered for Direct Entry subject to the stated requirements and UTME conditions.

Important Difference Between Cut-Off Mark and Admission Score

Candidates should understand the difference between a minimum cut-off mark and a competitive admission score.

The official AFIT announcement gives clear minimum UTME thresholds:

  • 200 for degree programmes
  • 160 for ND programmes

But reaching the minimum does not automatically mean that admission will be offered.

Therefore, candidates should regard the stated figure as the minimum eligibility threshold, not a guarantee of admission.

How to Improve Your Chances of Admission into AFIT

If you want to study at AFIT, meeting the minimum JAMB score is only the beginning.

1. Choose the right course

Select a programme that matches your academic qualifications and interests.

2. Check your O’Level subjects

Make sure you have the required credits for your chosen course.

3. Confirm your UTME combination

Your JAMB subject combination should correspond with the requirements of your chosen programme.

4. Complete the Post-UTME process

Make sure all information submitted during registration is correct.

5. Monitor AFIT announcements

Admission dates, screening arrangements and other requirements can change.

6. Avoid unofficial admission claims

Do not pay someone simply because they claim they can guarantee admission into AFIT.

Frequently Asked Questions

What is AFIT cut-off mark for 2026/2027?

The official AFIT minimum UTME score for degree programmes is 200, while the minimum for ND programmes is 160.

What is AFIT cut-off mark for Aerospace Engineering?

Aerospace Engineering is a degree programme, so the stated minimum UTME score is 200.

What is AFIT cut-off mark for Computer Science?

Computer Science is a degree programme, and the stated minimum UTME score is 200.

What is AFIT cut-off mark for Cyber Security?

The stated minimum UTME score for AFIT degree programmes, including Cyber Security, is 200.

Can I enter AFIT with 160 JAMB score?

A score of 160 meets the stated minimum for AFIT’s ND programmes, but it does not meet the 200 minimum for degree programmes.

Can I enter AFIT with 180?

A score of 180 meets the stated ND threshold but falls below the 200 minimum for AFIT degree programmes.

Can I enter AFIT with 200?

Yes, 200 meets the stated minimum UTME score for AFIT degree programmes, subject to the other admission requirements.

Does AFIT accept Direct Entry?

Yes. AFIT’s 2026/2027 admission announcement includes Direct Entry admission and directs DE candidates to the institute’s admission portal for the specific requirements.

Conclusion

The Air Force Institute of Technology (AFIT), Kaduna Cut-Off Mark for All Courses 2026/2027 has been clearly stated in the institute’s official admission announcement.

For the 2026/2027 academic session, candidates applying for AFIT degree programmes need a minimum JAMB score of 200, while candidates applying for the listed National Diploma programmes need a minimum score of 160.

AFIT offers a wide range of programmes, including Aerospace Engineering, Mechanical Engineering, Mechatronics Engineering, Computer Science, Cyber Security, Accounting, Economics, International Relations and several ND programmes.

However, meeting the cut-off mark does not guarantee admission. Candidates must also satisfy the relevant O’Level requirements, UTME subject combination, screening requirements and other admission conditions.

For the most accurate updates, prospective students should rely on AFIT’s official admission announcements and verify any changes before submitting an application.

About the author

Abdullateef

Leave a Comment